TOUGH Single phase Grid-Tied 3.3 kW - 5kW

image56

  • Maximum efficiency of 99.9%
  • Select Single/Dual MPPT (Maximum power point tracking) automatically, the range of MPPT: 150-500 Vdc.
  • Maximum DC voltage is up to 650V to design system on best MPPT easily.
  • Maintenance-free fan-less nature cooling design, Low acoustic noise while the inverter operates.
  • Modbus RS485 supported for monitoring.
  • Monitor the power information and the systemsettings via a computer, the monitoring softwareand RS232/RS485/Bluetooth (optional) interfaces.
  • IP65 waterl dust proof enclosure·
  • Up to 55 °C without derating.
  • Conformity to the EMC, Low Voltage Directives and Standards, e.g. 2004 /108 / EC, 2006 / 95 / EC, IEC / EN 62109-1 / -2 and VDE-AR-N 4105.

Warranty

Standard Warranty are 5 years.

Download Data Sheet

SPEC Sheet TOUGH Single phase Grid-Tied 3.3 kW - 5kW (pdf)

Download

Installation Manual TOUGH Single phase Grid-Tied 3.3 kW - 5kW (pdf)

Download

TRINERGY PLUS 3Phase Grid-Tied 10 kW – 70kW

image57

TRINERGY PLUS SEREIS three-phase grid-tied solar inverters adopt the latest technologies combination of T type three level topology and SVPWM, providing flexible system configuration and monitoring solutions for household, commerical and power plant systems.


  • Dual independent MPPTs(10kw-70kw), each MPPT can work up to 60% of maximum DC power.
  • High efficiency and stable performance at entire input voltage and output power range.
  • Maximum efficiency is up to 98.5%.
  • Wide input voltage range gives more possibilities for applying wild range of PV modules.
  • BUS capacitor adopts advanced film capacitor, designed with the advanced thermal simulation technology for longer lifespan.
  •  RS485 communication modes are optional for realizing multiple monitoring solutions via PC,mobile phones, internet etc. platforms.
  • Horizontal air flow design, easy for maintenance.
  • Integrated intelligent DC combiner and surge protection improve system’s flexibility and lower the cost.
  • 5V 200mA auxiliary DC power interface is optional for system expansion.
  • AC output power is adjustable between 1-100%.
  • Reactive power control and Power factor adjustable: 0.8 leading ~ 0.8 lagging.
  • RS485, Ethernet, WiFi, GPRS Communication modes are optional for realizing multiple monitoring solutions via local or internet by PC, smart phone, etc.

Warranty

Standard Warranty is 5 years. 

Download Data Sheet

TRINERGY PLUS Three Phase Grid-Tied 10 kW – 70kW (pdf)

Download